Skip to content
YouGauge

Device tests

Mouse tester for buttons and the scroll wheel

Press each mouse button and turn the wheel in the test area. Every button, scroll direction and step is shown as it happens, with a trail of where the pointer moves.

Press each mouse button and turn the wheel

  • Use the area that opens: right-click and the side buttons are caught there.
  • Scroll up and down, and tilt or shift-scroll for left and right.
Uses:Mouse

Ready to start.

Your answers stay on this device

This test runs in your browser. What you do here is not sent to a server, and it keeps working without an internet connection once the page has loaded.

Evidence Grade A

Uses a published scale, a standard method or a direct reading of your device. The sources are listed below.

Try next

Check your mouse buttons and wheel

  1. Press Start to open the test area.
  2. Press the left, middle and right buttons and the two side buttons. Each tile shows its presses and how long it was held.
  3. Scroll up and down, then tilt the wheel or hold Shift while scrolling for left and right.
  4. Press Stop to see how many buttons and directions responded, or Reset to start again.

How the result is worked out

The test area reads the browser’s mouse events. A button counts when it is pressed in the area; the hold time is from press to release. In the area the context menu, middle-click scrolling and the side buttons’ back and forward are switched off, so every button can be pressed safely. Each wheel event counts as one step in its direction, and the size of the last step is shown in the unit the browser reports. A wheel bounce is a single step the wrong way in the middle of a scroll, within 100 ms of the steps around it, which is how a worn wheel sensor usually shows up.

What changes the result

  • Mouse software: drivers can remap buttons or turn side buttons into keys, so a button may show up as something else or not at all.
  • Touchpads: they send many small scroll steps instead of notches, and a tap may count as the left button.
  • The operating system: some systems use the side buttons themselves, and a few browsers may still go back or forward.
  • Wheel settings: the size of each step depends on the system’s scroll settings and on smooth scrolling in the browser.

About this test

A mouse tester shows what your mouse actually sends to the computer. Use this mouse test when a button feels unreliable, when the wheel jumps while you scroll, or to check a new or second-hand mouse. It covers the five standard buttons, the wheel in all four directions and pointer movement.

Each button has a tile that lights up while it is held, counts presses and shows the last hold time, which makes this a mouse button test and a mouse click test in one. The side buttons, usually back and forward, are caught in the test area so they don’t take you away from the page. The wheel section counts steps in each direction and shows how large the last step was, in pixels or lines.

A worn wheel often sends a step the wrong way now and then. The test looks for single steps against the direction of the steps around it, close together in time, and counts them as wheel bounces. One bounce in a long session can be chance; several in a short scroll usually means the wheel needs cleaning or replacing.

The trail shows where the pointer moved. A trail with gaps or jumps can point to a dirty sensor or a poor surface. Everything is read in this page and nothing is sent.

Frequently asked questions

Why does the right button not open a menu?

The context menu is switched off inside the test area so you can press the right button as often as you like. It works as normal everywhere else on the page.

My side button still went back a page. Why?

Some browsers and mouse drivers handle the side buttons before the page sees them. If that happens the button still works, but it can’t be tested in this browser. Try another browser, or check the mouse software.

What is a wheel bounce?

A single step in the wrong direction while you scroll steadily, such as one step up in the middle of scrolling down. It usually means the wheel’s sensor is worn or dirty, and pages jump while you scroll.

Does one wheel event mean one notch?

With most wheels, yes. Touchpads, smooth wheels and some drivers send many small events for one movement, so each counts as a step.

Can I run a mouse click test for double clicking here?

This page counts every press and hold. For a mouse that clicks twice when you click once, use the double click test, which times the gaps between presses.

Is anything about my mouse sent or stored?

No. Events are read in this page only. When you press Stop, just the counts are kept in this browser.

References

  1. W3C. UI Events: MouseEvent and WheelEvent. The button numbers, button events and wheel deltas the test reads.

Last updated 16 November 2026