Skip to content
YouGauge

Device tests

Webcam test for picture, resolution and fps

Allow the camera to see its live picture with the resolution it actually sends and a frame rate timed from the frames themselves. Scan resolutions tries six sizes from 2160p to 360p.

See your camera’s picture, size and frame rate

  • Press Start and allow the camera when your browser asks.
  • Point the camera at something lit while the frame rate is timed for 3 seconds.
  • Press Stop for the result. Scan resolutions tries six sizes, one second each.
Uses:Camera

Ready to start.

Your answers stay on this device

This test runs in your browser. What you do here is not sent to a server, and it keeps working without an internet connection once the page has loaded.

Evidence Grade A

Uses a published scale, a standard method or a direct reading of your device. The sources are listed below.

Try next

Check your camera’s picture and frame rate

  1. Press Start and allow the camera when your browser asks. If you have more than one, pick it in the Camera list.
  2. Point the camera at something lit and wait 3 seconds while the frame rate is timed. Untick Mirror the picture to see it as others do.
  3. Press Scan resolutions to try six sizes from 2160p to 360p, one second each.
  4. Press Stop to turn the camera off and see the frame rate, the resolution and the scan.

How the result is worked out

The page asks for the camera at up to 1920 × 1080 and reads the size of the frames it actually receives. The browser calls the page once for every new frame, with the time the frame was captured, so the test records those times for 3 seconds and divides 1000 by the median gap to get frames per second. When the browser gives only the time a frame was shown, it counts the frames over the time they took instead, because those times snap to the screen’s refresh. A browser that can’t report single frames shows the rate the camera reports, and the result says so. The sizes and frame rates the camera offers come from its capabilities. The resolution scan asks for each height exactly with scaling turned off, so a size appears only when the camera has a mode of that height, and times each for one second.

What changes the result

  • Light: in dim light many webcams lengthen each exposure and drop to 15 fps or less, so test in the light you will use.
  • USB port and cable: a USB 2.0 port or a shared hub may not carry high resolutions at full frame rate, so the camera lowers one or the other.
  • Other apps: a video call app or the camera’s own software can hold the camera, block it or lock its settings.
  • The browser: browsers that ignore the no-scaling setting may scale another mode to fit, so their scan can list sizes the camera doesn’t really have.
  • Effects and virtual cameras: background blur and virtual camera software sit between the camera and the browser and can change both size and frame rate.
  • A busy computer: heavy tabs and apps can make the browser miss frames, which lowers the timed rate.

About this test

A camera test is the quickest way to see what a call will see: whether the camera works at all, how the picture looks in your light, and whether it delivers the quality on its box. This webcam test answers all three without installing anything.

The webcam resolution shown is the size of the frames the browser actually receives, which is not always the largest the camera can do. Cameras offer a list of modes, and the browser picks one that fits what the page asks for and what the connection can carry. The scan asks for each common height in turn, from 2160p (4K) down to 360p, and shows which ones the camera really sends and how fast.

The webcam frame rate is timed from the frames themselves rather than taken from the camera’s own claim. Many webcams say 30 fps but deliver less when the light is poor, because each picture needs a longer exposure. If your rate is low, add light in front of you and run the test again.

Everything happens in this page. The picture is shown and timed on your device, nothing is recorded, and the camera turns off when you stop the test or leave the page.

Frequently asked questions

Why does my 1080p webcam show a smaller resolution?

The browser picks a mode the camera offers, and the camera may offer less over a slow USB port, a hub or in low light. Scan resolutions shows which sizes it really sends; try another port if 1080p is missing.

Why is the frame rate below 30 fps?

Most often the light is too dim and the camera lengthens each exposure. Turn on more light and press Try again. A busy computer or a slow USB connection can also lower it.

Is the picture recorded or sent anywhere?

No. The picture goes from the camera to this page and nowhere else, and nothing is recorded. The camera is turned off when you press Stop or Reset or leave the page. Only the numbers of the result are saved, in this browser.

What does Not offered mean in the scan?

The camera has no mode of that height that the browser can use without scaling. That is normal for heights above what the camera was made for.

Why is the picture mirrored?

Most people find a mirrored picture of themselves easier to use, like a mirror. Others see you the right way round. Untick Mirror the picture to see it as they do.

Why does it say the camera is blocked, missing or in use?

Blocked means the site isn’t allowed to use the camera; allow it in the site settings next to the address bar. Missing means no camera is turned on. In use means another app is holding it, so close that app and press Start again.

References

  1. W3C. Media Capture and Streams. getUserMedia, getSettings, getCapabilities and resizeMode, which the resolution scan sets to none.
  2. WICG. HTMLVideoElement.requestVideoFrameCallback(). A call for every new video frame, with its capture time, which the frame rate is measured from.

Last updated 17 November 2026