Skip to content
YouGauge

Device tests

Dead pixel test for monitors and laptop screens

Go through seven full-screen colours at your own pace and mark any pixel that looks wrong. The screen changes only when you press a key or click, never by itself.

Before you start. This test changes large parts of the screen quickly. If flashing light or fast movement can make you unwell, skip it. It never flashes more than three times a second.

Ready to start.

Your answers stay on this device

This test runs in your browser. What you do here is not sent to a server, and it keeps working without an internet connection once the page has loaded.

Evidence Grade A

Uses a published scale, a standard method or a direct reading of your device. The sources are listed below.

Try next

Look for dead and stuck pixels

  1. Clean the screen, tick I’ve read this and press Start. The page fills the screen with black.
  2. Press the right arrow, Space or click to go through white, red, green, blue, 50% grey and a checkerboard. The left arrow goes back.
  3. When you see a fault, press M and click on it to mark it. Press M again to go back to changing colours.
  4. Press Esc to finish, then read how many places you marked and where they are.

How the result is worked out

Each screen is one flat colour drawn at full strength, black, white, pure red, green and blue, and 50% grey, followed by a checkerboard that alternates black and white on every device pixel. A dead pixel stays dark on the bright screens. A stuck pixel shows one bright colour on black and on the colours it doesn’t belong to. A faulty sub-pixel shows on the red, green or blue screen of its own colour. The checkerboard shows pixels that don’t switch with their neighbours. The screen changes only when you press a key or click, no faster than three times a second, and never by itself. A mark records where you clicked in device pixels from the top left of the screen, which is the position in the page times the device pixel ratio, with the colour on screen at the time.

What changes the result

  • Dust and smudges: they look like dark pixels. Clean the screen and check whether the spot moves or wipes off.
  • Full screen: if the browser doesn’t allow it, the colours fill only the test area and the edges of the screen aren’t covered.
  • Night light and colour filters: blue light filters and colour profiles tint the screens, so white may look warm or grey may look coloured.
  • Brightness and the room: light bleed and uneven backlight show best on the black screen, in a dark room, with brightness turned up.
  • Zoom and scaling: at a browser zoom other than 100% or with fractional display scaling, the checkerboard can look like flat grey in patches.
  • Screen type: OLED screens turn pixels off for black, so light bleed is a backlit LCD effect, while OLED faults show as single dark or bright dots.

About this test

A new monitor or laptop is worth checking in its first days, while it is easy to return. This dead pixel test is a simple dead pixel checker: it fills the screen with one colour at a time, so a single wrong pixel stands out against everything around it.

Go through the colours slowly and scan the screen in rows, from one corner to the other. On black, look for bright dots: that is the stuck pixel test. On white and the three colours, look for dark dots or dots of the wrong colour. The 50% grey screen is good for spotting uneven patches and tint, and the black screen in a dark room shows light bleed around the edges of LCD screens.

When you find something, mark it. The table at the end gives each mark’s position in device pixels and the colour you saw it on, which is what a seller or maker usually asks for when you report a fault.

The colours change only when you ask, so you can take as long as you need on each. The test never flashes and never changes the screen by itself.

Frequently asked questions

What is the difference between a dead pixel and a stuck pixel?

A dead pixel doesn’t light at all, so it shows as a dark dot on white and on the colours. A stuck pixel is lit all the time in one colour, so it shows as a bright dot on black.

Can this test fix a stuck pixel?

No. This test only shows still colours and never flashes. If a pixel stays stuck, keep your marks and contact the seller or the maker.

How many dead pixels are acceptable?

That depends on the policy of the shop or maker, which usually says how many pixels of each kind of fault a screen may have before it is replaced. Read the policy for your screen and compare it with your marks.

How do I check for light bleed?

Turn the room lights off, turn the brightness up and look at the black screen. Light bleed shows as brighter patches near the edges or corners of an LCD screen.

Why does the checkerboard look grey or patchy?

Every square is one device pixel, which is too small to see one by one, so from a distance it looks grey. Patches that look different from the rest are worth a closer look; set the browser zoom to 100% first.

Are my marks sent anywhere?

No. The colours are drawn on your device and the marks stay in this browser with the result. You can clear them in My results.

References

  1. WHATWG. Fullscreen API Standard. Full screen for the colour area, which the test asks for when you press Start.
  2. ISO 9241-307:2008. Ergonomics of human-system interaction, part 307: analysis and compliance test methods for electronic visual displays. Defines pixel faults (always on, always off, stuck sub-pixels) and fault classes. The page leaves classes to the seller’s or maker’s policy.

Last updated 17 November 2026